background image

4

This manual has been designed to assist in maintaining the vehicle in accordance 
with procedures developed by the manufacturer. Adherence to these procedures and 
troubleshooting tips will ensure the best possible service from the product. To reduce 
the chance of personal injury or property damage, the following must be carefully 
observed.

1: Safety Information

General Safety

STAR EV strongly suggests that all users and maintenance personnel read this 
entire manual paying particular attention to the 

CAUTIONS

 and 

WARNINGS

 con-

tained therein.

Star EV reserves the right to make design changes without obligation to make these 
changes on units previously sold and the information contained in this manual is 
subject to change without notice.

Star EV is not liable for errors in this manual or for incidental or consequential or 
consequential damages that result from the use of the material in this manual.

These vehicles are designed and manufactured for off-road use. Some communi-
ties may permit these vehicles to be operated on their streets on a limited basis and 
in accordance with local ordinances.

With electric powered vehicles, be sure that all electrical accessories are grounded 
directly to the battery (-) post. Never use the chassis or body as a ground connec-
tion.

Refer to Vehicle Specifications for vehicle seating capacity.

Never modify the vehicle in any way that will alter the weight distribution of the ve-
hicle, decrease its stability or increase the speed beyond the factory specification. 
Such modifications can cause serious personal injury or death.

Vehicles that are capable of higher speeds must limit their speed to no more than 
the speed of other vehicles. Additionally, speed should be further moderated by the 
environmental conditions, terrain and common sense.

Summary of Contents for BN72-08-AC-Autodrive-M





































Reviews: