Stardom DeckTank DT4-SB2, User Manual

Page: 6 / 44

6
3. Hardware installation
Please follow the instructions below to complete the hardware installation.
Step 1 Open the package and take out the product making sure that all the enclosed contents are not
damaged or missing. Should you find damages or missing contents, please contact your supplier
immediately.
Step 2 Place the system on a stable surface. Ensure that it is well ventilated without blockage to the vent
and kept away from locations near water or where the product may become vulnerable resulting in
damages.
Step 3 Use the provided key in the accessory kit and inserted into the key access opening to eject the
removable drive tray latch and extract the removable drive tray.
Step 4 Remove the drive stabilizer from the removable tray then mount the hard drive onto the removable
drive tray and secure it with the screws enclosed in the accessory kit. Once completed, insert each
drive back to the drive position starting with Drive position A.
Step 5 Use the provided cables to connect your computer to the relative interface connection of your
preference on the system unit.
Step 6 Attach the AC power cable to the DC power adapter then connect one end to the system unit and the
other end to the power socket. Once completed, you may power on the unit.
Once your computer has also booted, your operating system should recognize each drives automatically. If
the hard drives installed require formatting, follow the formatting instructions given by the operating system
to format each drive volume to your preference. Once the formatting has been completed, the device is
ready for use. Onc e your computer has also booted, your operating system should recognize each
drives automatically. If the hard drives installed require formatting, follow the formatting instructions
given by the operating system to format each drive volume to your preference. Once the formatting
has been completed, the device is ready for use.