24
ERECTING YOUR AIR AWNING
3.4 Pitch your Air awning with pegs on each corner (2 front/2 rear). It is
important to start with the two pegging points at the rear (closest to the
caravan) and pull the Air awning towards and under the caravan to create a
seal between the caravan and the Air awning. Take a line vertically from the
edge of your caravan and peg in position and this will regulate the distance
to the tubes at the front of the Air awning. The multi position pegging
points allow flexibility. Make sure the Air awning is square and do not put
too much pressure on the pegging points.
3.5 The double action pump is equipped with a manometer (Pressure
Gauge). Inflate all air tubes up to a pressure of between 6 to 8 Psi (=
0,4 – 0,5 bar). Remove the pump inflation tube and seal the valves with
the screw-on cap.
4
1
3
5 6
2
90°
3.6 Check if the complete awning is still standing in a rectangular shape at
ground level and start pegging the awning.
Summary of Contents for Magnum Air 260
Page 3: ...GEBRUIKSAANWIJZING MANUAL INSTRUCTIONS Magnum Air Weathertex...
Page 35: ...NOTITIES NOTES...
Page 36: ...NOTITIES NOTES...
Page 37: ...NOTITIES NOTES...
