Starbridge Networks
Lynx L-525 4 Port and Wireless Modem
Page 31 of 56
The screen below will appear when you click on
Add
. Input the filter name,
source information (from the LAN side), and destination information (from
the WAN side). Then click on
Save / Apply
.
IP Filtering—Incoming
Incoming filter filters the WAN traffic to the LAN side. Click on the
Add
button to add incoming filter settings.
Enter a filter name, information about the source address (from the WAN
side), and information about the destination address (to the LAN side). Select
the protocol and WAN interface, and then click on
Save/Apply
to add the
setting.
MAC Filtering
MAC filtering can forward or block traffic by MAC address. You can change
the policy or add settings to the MAC filtering table using the MAC Filtering
Setup screen.
