Starbridge Networks
Lynx L-525 4 Port and Wireless Modem
Page 10 of 56
Configuring Your Computer
Prior to accessing the Lynx L-525 through the LAN port, note the following
necessary configurations—
•
Your PC’s TCP/IP address: 192.168.1.X
•
The Lynx L-525’s default IP address:
192.168.1.1
•
Subnet mask: 255.255.255.0
Following are the procedures for configuring your computer. Use the
instructions for the operating system that you are using.
Windows 2000
1.
In the Windows taskbar, click on the
Start
button and point to
Settings,
Control Panel
, and
Network and Dial-up Connections
(in
that order).
2.
Click on
Local Area Connection
. When you have the Local Area
Connection Status window open, click on
Properties
.
3.
Listed in the window are the installed network components. If the list
includes Internet Protocol (TCP/IP), then the protocol has already been
enabled, and you can skip to Step 10.
4.
If Internet Protocol (TCP/IP) does not appear as an installed
component, then click on
Install
.
5.
In the Select Network Component Type window, click on protocol and
then the
Add
button.
6.
Select Internet Protocol (TCP/IP) from the list and then click on
OK
.
7.
If prompted to restart your computer with the new settings, click
OK
.
8.
After your computer restarts, click on the
Network and Dial-up
Connections
icon again, and right click on the
Local Area
Connection
icon and then select
Properties
.
9.
In the Local Area Connection Properties dialog box, select Internet
Protocol (TCP/IP) and then click on
Properties
.
10.
In the Internet Protocol (TCP/IP) Properties dialog box, click in the
radio button labeled
Use the following IP address
and type
