18
5.4.1
Ping Test
Once you have your Lynx L-320 configured, ensure you can ping the
network. You can access the Ping Test page by clicking on the “here”
hyperlink in Diagnostic Page. Type the target address that you want to ping.
If your PC is connected to the Lynx L-320 via the default DHCP configuration,
you should be able to Ping the network address 192.168.1.1. See Fig 1-9.
If your ISP has provided their server address, try to ping the address. If the
pings for both the WAN and the LAN sides are complete and you have the
proper protocols configured, you should be able to surf the Internet. By
default when you select ping test, the Lynx L-320 will ping itself 3 times. The
Lynx L-320 passed the Ping test; this basically means that the TCP/IP
protocol is up and running. If this first Ping test does not pass, the TCP/IP
protocol is not loaded for some reason; you should restart the Lynx L-320.
Figure 1-9: Ping Test Screen
5.4.2
Modem Test
This test can be used to check whether your Modem is properly connected to
the Network. Select your connection from the list and press the ‘Test’
button. See Fig 1-10.
