Figure 4
D1:Temperature LED [ Normal : Green, Failed :Red ]
D2:Fan LED : [ Normal : Green, Failed :Red ]
D3---D7: LED for HDD Access and failure (Green LED
lights on while HDD is linking. And Green LED
is blinking while HDD accessing. The LED will
turn red when HDD failed. The green LED and
red LED will alternate blinking during rebuilding)
D8:SYS LED: Light ON while system is ready
D9:SYS Reset / or Backup (option)
D10:HDD Safety Lock
D11:Power LED
D12:Power Safety Lock ( It prevents the handle
bouncing out while HDD is working)
D13: Power Supply 120W (AC 100~240V, 50/60Hz
Auto Switching
---Rear View---(see
Figure 5
)
Figure 5
E1: Upper Cooling Fan (8x8cm)
E2: Fan Speed Control Switch:
--FAN RPM HIGH(3600rpm)&
--FAN RPM LOW(2800 rpm)
Options to run at high speed or low speed.
E3: Lower Cooling Fan (8x8cm)
E4: Reset/Change Mode
*Push the button less than 2 seconds for system
reset
*Hold to press the button for over 2 seconds to
apply new RAID mode)
E5: RAID Configure Switch
E6: ESATA Port
E7: Power Switch
E8: Power Input(AC 100V~240V)
Page
5
