3-7
Using the StarBoard
English
StarBoard PX-DUO-50P/65P
3.3 How to Use the Electronic Pen
3.3.1 Using the Electronic Pen
To use the electronic pen to draw characters or images, place the tip of the electronic pen on
the board and then move the pen. When you release the tip of the electronic pen from the
board, the writing is complete. Be careful of the following two points when using the
electronic pen.
(1) When drawing with the electronic pen, keep the pen as perpendicular as possible to the board
and apply force sufficient enough to cause the pen tip to retract into the electronic pen.
(2) A miniature transmitter is embedded in the tip of the electronic pen. If you hold the
transmitter area of the electronic pen while drawing characters or images, the drawing data
from the electronic pen might not be transmitted correctly. If the characters or images drawn
on the whiteboard are not imported correctly into the PC, change your grip on the electronic
pen and then verify that they are displayed correctly.
Electronic pen operations are detected when the digitiser reads the infrared beams that are
generated by the pen. If the beam between the electronic pen and the digitiser is blocked,
normal input becomes impossible. Avoid blocking them during use.
Blocking of the Infrared Beam
Summary of Contents for PX-DUO-50P
Page 14: ...StarBoard PX DUO 50P 65P English...
Page 24: ...StarBoard PX DUO 50P 65P English...
