2-3
English
StarBoard PX-DUO-50P/65P
StarBoard Setup
Follow the procedure below to assemble the plasma display. Perform the assembly work with
the stand casters locked.
(1) Fit the PX-DUO Series Digitiser over the plasma display from the front.
(2) Secure the Digitiser clamp A using the Digitiser lock screws.
(3) Secure the Digitiser clamp B using the Digitiser lock screws.
(Place the rubber cushion on inside-bottom.)
(4) Secure the Pen tray using the Digitiser lock screws.
(When the Pen tray is unnecessary, using the Digitiser clamp B.)
(2)
(4)
(3)
PX-DUO Series Digitiser
Plasma Display
Pen tray
Digitiser lock screws
Digitiser clamp B
Digitiser clamp A
Digitiser lock screws
Place the rubber cushion on inside-bottom.
Summary of Contents for PX-DUO-50P
Page 14: ...StarBoard PX DUO 50P 65P English...
Page 24: ...StarBoard PX DUO 50P 65P English...
