background image

StarBoard PX-DUO-50P/65P 

English 

Notices 

Reproduction or reprinting, without permission, of this manual or any part thereof is prohibited. 
The contents of this manual are subject to change without prior notice. 
Every effort has been made to ensure that this manual is complete and correct. However, should 
any questionable points, mistakes, etc., come to your attention, please inform the vendor. 
Please be advised in advance that this company will assume no responsibility for losses, etc., 
resulting from the operation of this product, regardless of the preceding clauses. 
Also, in the event that this manual has pages out of order, missing pages or other problems with 
the printing or binding, it will be replaced free of charge within one year after purchase. Contact 
technical support for details. 
 
 

Discarding this product 

This product must be disposed of as industrial waste, in accordance with the relevant laws and 
regulations. 
 
 
 

Special Instructions 

 
This manual includes descriptions of required components in addition to descriptions of the 
product itself. For details on required components, see "4.7 Required components (Other vendor)." 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for PX-DUO-50P
























































Reviews: