StarBoard iFPD Series, User Manual

Page: 37 / 40

Page 37 of 40
Connecting to the PC
Connecting to a PC

Leave the StarBoard iFPD unit powered off

Using the VGA cable connect the StarBoard iFPD unit VGA port with that of the PC
 Connect USB cable to the PC and to the the StarBoard iFPD unit.


Power up the StarBoard iFPD unit and use the remote control unit (RCU) to select input source (VGA Source)
 Use cables supplied together with this StarBoard iFPD unit.
The StarBoard iFPD unit has a driver-less touch frame.
Connect the USB cable to
Once the USB cable is connected, the unit is touch-ready.
Allow a few seconds for the StarBoard iFPD to register the connected PC.
Maintenance of touch frame
 The IR technology is sensitive to excessive dust

Keep the screen surface free from dust

Clean with a soft dry cloth
Trouble Shooting
No Signal
Possible Causes: Connecting ports damage, VGA or HDMI line failure, Source input selection error, VGA or HDMI line not fixed
connected
Corrective actions: Re-connect VGA or HDMI line and check if it is fixed firmly
Select the right input source
No Audio
Possible causes
：
audio line not connected, check audio output from PC (eg volume, mute etc)
Corrective actions
：
Ensure audio cable is connected if using VGA, check volume and mute output in PC
Touch frame issues
Off calibration.
Corrective action
：
Re-do the calibration, using Windows or IR frame calibration software included with the StarBoard iFPD
unit, Check display resolution of your PC
Touch point drift