8
TOILET ASSEMBLY
1. Turn the toilet tank upside down and rest on protective
padding. Install the tank to bowl gasket over the bottom
threads of the flush valve, making sure that the tank
gasket covers the flush valve nut and the tapered side is
toward the bowl.
CAUTION
: Do not use pipe dope on any plastic or rubber
parts.
CAUTION: Be careful when tightening bolts or nuts
against china to prevent cracking the china.
2. Lift the toilet tank right side up and position the tank on the
bowl by centering the gasket and aligning holes on the
bowl. Install tank to bowl bolts and rubber washers with
narrow side down, through the tank and bowl.
3. Push down on the top of the toilet tank one side at a time
while tightening plastic washers and nuts under the bowl.
Alternate tightening nuts to achieve a watertight seal,
while make sure the bowl and tank are level.
CAUTION: Do not overtighten or china may crack.
Tank to Bowl
Gasket
Flush Valve
Threads
Flush Valve Nut
Toilet Tank
IL1735
1
Tank to Bowl Bolts
Rubber Washer
IL1736
Toilet Tank
Toilet Bowl
2
Plastic Washers
Plastic Nuts
IL1737
3
