3
Temperature:
1. To view the actual temperature, press and
hold "Temp Button". Display will read "Lo F" if
temperature is below 273°F and "Hi F" if
temperature is above 573°F.
To Program Temperature:
1. Press and hold "Temp" (actual temperature
displays).
2. While holding "Temp", press "Start/Stop"
(program temperature displays).
3. Release "Temp" and "Start/Stop".
4. Press "5/+" or "6/-" to change current preset
program
temperature.
5. Press "Start/Stop" to save the new
temperature.
6. Repeat procedure for other program (2, 3, 4,
5 & 6)
To Program Time:
1. Press and hold the program button (1 - 6)
until two beeps (preset time displays).
2. Release program button.
3. Press "5/+" or "6/-" to change time up or
down.
4. Press "Start/Stop" to save new time.
5. Repeat procedure for other programs.
Programs (1 - 6):
To change program, press and hold desired
button (1 - 6) for one (1) second.
Timer:
1. To operate timer, press "Start/Stop" button.
Time will countdown to "0.00".
2. When timer reaches "0", alarm will sound.
3. Press "Start/Stop" to turn off the alarm.
CORD WITH 20 AMP PLUG
Two cord take-up brackets are located on the
bottom of the unit. These brackets are to be used
to wrap up the excess cord in the event that the
plug-in receptacle is located close to the unit.
These brackets will prevent accidental damage to
the power cord and prevent entanglement in the
working mechanism of the unit.
MONTHLY LUBRICATION/INSPECTION
1. Apply two (2) drops of nontoxic mineral oil
onto counter balance shoulder screw and
nylon
spacer.
2. Check all bolts/screws and tighten if
necessary
.
CLEANING
All surfaces except the cooking grids are
stainless steel and can be cleaned with a
warm, damp cloth and detergent.
CAUTION
DO NOT IMMERSE OR LET THE UNIT
STAND IN WATER.
DO NOT HOSE DOWN.
KEEP AWAY FROM RUNNING WATER.
To remove burned on grease or food residue use
the following mixture:
1 Tablespoon liquid dish detergent
1 Cup of warm water
CAUTION
For models with #6 programmed for "CLEAN"
mode:
1. Press #6 button.
2. Open toaster to allow faster cooling.
3. Alarm will sound when toaster is 350° F.
4. Turn unit OFF.
5. Unplug the unit.
6. Begin toaster cleaning procedure using
answer system book 5, under toaster.
BEFORE CLEANING ALL OTHER
UNITS MAKE SURE POWER
IS TURNED OFF AND UNIT IS
UNPLUGGED.
