Prentive Maintenance - Treadmills
Doc: 635-4075 Rev: A
27
WAX RUNNING BELT & DECK
Step 4:
SPREAD WAX:
Bottle: Flip up the nozzle on the cap of the wax bottle. Point the nozzle at the deck. Be sure that the
bottle is tilted at a downward angle. Give the bottle 2 squeezes while aiming the wax under the belt
on top of the deck. Gently shake the bottle between each squeeze.
Bag: Open bag enough to get 1 teaspoon of wax out. You will not need a heaping spoonful, rather
just enough to fill the spoon, a little over level. Spread the wax under the belt, gently blowing it to
avoid piles or clumps.
Repeat Steps: Repeat steps 2 & 3, about 18 inches from the end of the deck.
Repeat Steps: Repeat steps 2, 3 & 4, on the right side of the unit.
Step 5:
WALK:
Plug in the unit and turn it on. Start the treadmill at 1 mph and walk on the all sections of the
belt and deck for a minute to ensure the wax has been evenly distributed. Then proceed into a
normal workout to allow the wax to work into the belt properly.
