Prentive Maintenance - Treadmills
Doc: 635-4075 Rev: A
24
Ref Nr: 14 (Applies to All Treadmill Models)
SPEED SENSOR
Recommended:
Bi-Annually (Every 6 months)
Average Time:
3 minutes
TOOLS
•
#2 Phillips screwdriver (to remove shroud)
•
#2 flat head screwdriver
PREPARATION
•
Disconnect treadmill power cord from the wall outlet
•
Remove front shroud
Speed Sensor Check:
1. Check that the speed sensor bracket on the top of the motor is securely fastened.
2. Check that the speed sensor is clean, free of obstruction.
3. Check the gap between Sensor and RPM wheel (1/32" - 1/16") (1 to 2 mm).
Replace shroud and turn treadmill back on again.
