Page 27
Maintenance Mode allows access to service and diagnostic information, as well as provides
the ability to adjust certain program default parameters that alter how the treadmill performs.
Embedded displays and E-Series LED’s also have a reduced option “Manager Mode” intended
for settings that can be changed for the club/facility or country for which the treadmill has been
installed.
LED Consoles
To enter Maintenance Mode:
1. Press and hold the
,
and
keys together.
2. A beep will sound and “MAINTENANCE MODE” will display
momentarily in the Information Window.
3. Release all keys. “SERIAL NO
#####
” will display in the Infor-
mation Window.
The following keys are available in MAINTENANCE MODE:
Increase and Decrease LEVEL Keys
: Adjust the value of the displayed parameter up and down,
respectively, in increments of 1 unit (OpenHub) or Navigate between different console settings
(E-Series & S-Series). These keys do not save the new value - see OK Key below.
Note:
In older StarTrac documentation, you will also see these
keys represented by the following icons:
Increase and Decrease SPEED Keys
(
E Series & S Series
): Adjust the value of the displayed parameter
up and down, respectively, in increments of 1 unit. These keys do not save the new value - see OK Key
below.
Numeric Keypad:
Allows you to enter specific values for numeric parameters. These keys do not save
the new value - see OK Key below.
OK Key:
Updates (saves) the values of all parameters in non-volatile memory, and exits Maintenance
Mode.
STOP/Pause Key
(
E Series & S Series
)
:
is used to exit a sub-menu or exit the maintenance mode.
NOTE: To exit Maintenance Mode without saving any values or settings, press the QUICK START key.
The Maintenance mode has a 30 second time limit after the last key has been hit. After 30 seconds, it
will automatically exit the Maintenance Mode.
Maintenance Mode