Star-Oddi Starmon Mini User Manual Download

Page: 83 / 92

User Manual

SeaStar Graphic Supporting Software

Page 83

Appendix

A.1 Directories and Files

Directory Structure

The user can choose between SeaStar default data directory structure (path) or

define his own data path. As the SeaStar program is a multi recorder type program,

the directory structure branches from the directory where SeaStar is positioned down

Starmon mini

recorder directories, named after the serial numbers of the recorders, designed to

hold data for each individual recorder (data directory). All in all it is a three level

directory structure.

An example of this directory structure for Starmon mini is:

C:\Seastar\

The installation directory, SeaStar.exe location.

C:\Seastar\Starmon mini\

The type directory for Starmon mini.

C:\Seastar\Starmon mini\T0801\ The directory for the T0801 recorder.

When connecting to a recorder for the first time, SeaStar creates the recorder

directory, named after the serial number of the recorder.

Information Files

SeaStar uses information files to store and retrieve settings. There are two types of

information files:

The type-INI files, (for example StarmonT.ini for Starmon mini).

The information type files are all in the installation directory, they contain

information on specific settings for each type.

The type-INI files for Star-Oddi products are:

StarmonT.ini

Starmon mini

DSTm.ini

DST milli

DSTr.ini

DST milli recycle

DSTu.ini

DST micro

DSTc.ini

DST centi/centi-ex

DSTs.ini

DST CTD

DSTg.ini

DST GPS

The recorder-INI files, for example T0801.ini contains settings information and data file

positioning for the T0801 recorder. The recorder-INI files are located in the

Files Locations

As stated previously, the type-

SeaStar

recorder-INI files are placed in the recorder type directory. All other recorder and

Distributed by MicroDAQ.com, Ltd. www.MicroDAQ.com (603) 746-5524

Summary of Contents for Starmon Mini




























































































Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands

Star-Oddi Starmon Mini, User Manual

Search results

Summary of Contents for Starmon Mini

Reviews:

Related manuals for Starmon Mini

Brands by name

Popular brands