– 48 –
(2) ESC/POS mode
Switch
Function
ON
OFF
1-1
Command emulation
Always OFF
1-2
Graphic adjustment
203 DPI
180 DPI
1-3
Should not be changed (Should be set to on)
1-4
Sensor adjustment
Invalid
Valid
1-5
USB mode
Printer class
Vendor class
1-6
Handshaking conditions
(conditions for BUSY)
Offline or receive
buffer full
Receive buffer full
1-7
ASB function *1
Printer class
Valid
Invalid
Vendor class
Invalid
Valid
1-8
Should not be changed (Should be set to on)
1-9
Low-power consumption mode
nvalid
Valid
1-10
Should not be changed (Should be set to on)
*1 ASB Function
When this function is enabled, status information is automatically sent to the host whenever the
printer status changes (such as when the cover is opened, paper runs out, or an error occurs).
For information about automatic status information transmission, refer to the separate Program-
mer's Manual (Star Line Mode and ESC/POS Mode).
DIP-SW 2
Switch
Function
ON
OFF
2-1
Always ON
Should be set to on
2-2
2-3
2-4
The factory settings of DIP switch are all on.
