Star Micronics TSP700II Series, Hardware Manual

Page: 46 / 68

– 42 –
11-1. Parallel Interface Model
ON ON
OFF OFF
DIP-SW 1
Switch 1-1 Command emulation
ON Star Mode
OFF ESC/POS Mode
The factory settings of DIP switch are all on.
The functions of switches 1-2 through 1-10 will change according to the command emulation
that has been set using switch 1-1.
(1) Star mode
Switch Function ON OFF
1-1 Command emulation Always ON
1-2 Should not be changed (Should be set to on)
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment Invalid Valid
1-5 Pin #31 (INIT) reset signal Valid Invalid
1-6 Handshaking conditions
(conditions for BUSY) Offline or receive
buffer full Receive buffer full
1-7
ASB function *1
Invalid Valid
1-8
NSB function *2
Invalid Valid
1-9 Low-power consumption mode Invalid Valid
1-10 Should not be changed (Should be set to on)
(2) ESC/POS mode
Switch Function ON OFF
1-1 Command emulation Always OFF
1-2 Graphic adjustment 203 DPI 180 DPI
1-3 Should not be changed (Should be set to on)
1-4 Sensor adjustment Invalid Valid
1-5 Pin #31 (INIT) reset signal Valid Invalid
1-6 Handshaking conditions
(conditions for BUSY) Offline or receive
buffer full Receive buffer full
1-7
ASB function *1
Invalid Valid
1-8 Should not be changed (Should be set to on)
1-9 Low-power consumption mode Invalid Valid
1-10 Should not be changed (Should be set to on)
No. 1 2 3 4 5 6 7 8 No. 1 2 3 4
9 10
DIP-SW 1 DIP-SW 2