Star Micronics LC24-15II, User Manual

Page: 91 / 155

84
Set bottom margin
Mode ASCII Decimal Hexadecimal
Both <ESC> “N” n
27 78
n
1B 4E
n
Sets the bottom margin to n lines, where n is between 1 and 127 in
Standard mode or between 1 and 255 in IBM mode. The bottom margin
is reset when you change the page length.
Cancel bottom margin
Mode ASCII Decimal Hexadecimal
Both <ESC> “O”
27 79 1B 4F
Cancels the bottom margin.
Form feed
Mode ASCII Decimal Hexadecimal
Both <FF>
12 0C
Feeds the paper to the top of the next page according to the current
page length, and moves the print position to the left margin. When
friction feed is used, this command ejects the current page.
Set vertical tab stops
Mode ASCII Decimal Hexadecimal
Both <ESC> “B” n1 n2 .... <0>
27 66
n1 n2 ....
0 1B 42
n1 n2 ....
00
Cancels all current vertical tab stops and sets new vertical tab stops at
lines n1, n2, etc., where n1, n2, etc. are numbers between 1 and 255.
The maximum number of vertical tab stops allowed is 16 in Standard
mode and 64 in IBM mode. The tab stops must be specified in ascending
order; any violation of ascending order terminates the tab stop list.
Standard termination is by the <0> control code. The vertical tab stops
are set in terms of the current line spacing and do not move if the line
spacing is chnaged later.