Star Micronics LC-1021 User Manual Download Page 29

Page: 29 / 91

Line feed 23

Line feed

❏

Make sure the printer is off-line (

ON LINE

indicator is not lit).

❏

Press

LINE FEED

once to feed paper one line. Holding down

LINE FEED

continually feeds paper, one line at a time, until you release the button.

Paper eject (cut-sheet paper)

❏

Make sure the printer is off-line (

ON LINE

indicator is not lit).

❏

Press

SET/EJECT/PARK

to eject the paper.

❏

After the paper is ejected, the printer will beep and the

POWER

indicator

will flash to indicate there is no paper in the printer.

Form feed (fanfold paper)

❏

Make sure the printer is off-line (

ON LINE

indicator is not lit).

❏

Press

FORM

FEED

and the printer will automatically feed the paper to the

top of the next page.

Parking fanfold paper

❏

Make sure the printer is off-line (

ON LINE

indicator is not lit).

❏

Press the control panel’s

SET/EJECT/PARK

button.

❏

The printer automatically reverse feeds the fanfold paper until it is no
longer in contact with the platen.

Micro feed

Use the following operation to feed the paper in very small increments. This
makes it possible to align the print head exactly where you want it.

❏

Make sure the printer is off-line (

ON LINE

indicator is not lit).

❏

While holding down

ON LINE

, press

LINE FEED

to feed the paper

forward or

FORM

FEED

to feed the paper backward.

Summary of Contents for LC-1021




























































































Search results

Summary of Contents for LC-1021

Reviews:

Related manuals for LC-1021

Brands by name

Popular brands

Star Micronics LC-1021, User Manual

Search results

Summary of Contents for LC-1021

Reviews:

Related manuals for LC-1021

Brands by name

Popular brands