– 9 –
8 . Inner Cover / Lens / LED PCB
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Remove the front cover unit to the procedure described
in item 7.
(3) Removal
•
Two connectors
1
•
Four screws
2
[ Tightening torque : 0.8±0.2 N.m]
•
Inner cover
3
•
Lens
4
•
Two LED PCBs
5
[ Caution in assembly ]
•
Check the directions when installing the two LED
PCBs.
•
Align the 14 holes on the case with the lens boss.
•
Route the LED PCB cable through the board chassis
(section C) and once around the cutter cable on the
left and the PF motor cable on the right.
•
Check that the cover lock unit has not shifted when
you install the inner cover.
2
2
2
3
4
5
1
5
1
LED facing out
C
C
LED PCB Cable
LED PCB Cable
Cutter Cable
PF Motor Cable
Cover Lock Unit