– 8 –
7 . Front Cover Unit
Required jigs and tools: Electric screwdriver (Driver bit 2)
(1) Turn off the printer and unplug it from the electri-
cal outlet.
(2) Remove the each cover and the front panel to the pro-
cedure described in item 1.
(3) Remove the board cover unit to the procedure de-
scribed in item 2.
(4) Removal
•
Two connectors
1
•
Screw
2
[ Tightening torque : 0.8±0.2 N.m]
(5) Push the open lever
3
toward yourself to open the fornt
cover unit
4
.
(6) Spread to the outside at B points (left/right) of front
cover unit
4
.
[ Caution in assembly ]
•
Unlock the cover if it is locked.
B
4
3
1
2
Lever
Route the cable
between the circuit
board chassis and
the case.
