Star Microwave Cirius SHC , 2016
3.4.1.1.1 ETHERNET PORT SPEED RATE CONFIGURATION
Step 1
Click
Configuration > Switch > Ports
in Functional Navigation Tree;
Step 2
Click corresponding port
Speed - Configured
drop-down menu, and select the
appropriate value;
Step 3
Click <Save> and wait for the page refresh;
Step 4
Check whether
Speed - Current
display the correct value;
- - - End
3.4.1.1.2 ETHERNET PORT DISABLE
Step 1
Click
Configuration > Switch > Ports
in Functional Navigation Tree;
Step 2
Tick corresponding port
Speed - Configured
drop-down menu, and select the
disable option;
Step 3
Click <Save> and wait for the page refresh;
Step 4
Check whether
Speed - Current
display down status;
- - - End
3.4.1.1.3 ETHERNET PORT FLOW CONTROL CONFIGURATION
Step 1
Click
Configuration > Switch > Ports
in Functional Navigation Tree;
Step 2
Click corresponding port
Flow Control - Configured
and click <Save>;
Step 3
Wait for the page refresh,
Flow Control - Current Tx/Rx
will display tick icon;
- - - End
3.4.1.1.4 ETHERNET PORT ALLOW MTU CONFIGURATION
Step 1
Click
Configuration > Switch > Ports
in Functional Navigation Tree;
Step 2
Change corresponding port
Max Frame Size
to appropriate value;
Step 3
Click <Save> and wait for the page refresh;
- - - End
NOTE:
•
All settings are not effective until you click <Save>. Star Microwave Service Corporation
recommends saving after every change is made.
•
Please check carefully before clicking <Save> in order to avoid a operation.
