-7-
Attach Forked Brackets using Alternate Method
If you are not using the visor clip installation described on the previous page,
continue below.
1.
Some vehicles may not have visor clips appropriate for the previously
described installation
, or may completely lack any visor clips. An alternate
mounting screw hole is provided in the bracket for these situations. This hole
can be used with an appropriate user supplied screw or other suitable fastener.
2. If you are using the alternate mounting screw hole, you will need to locate the roof
brace under the headliner of the vehicle.
3. Once you have located the roof brace, pick an area to mount the brackets (one on
each side) that is a minimum of 3” from the center of your window and a maximum
of 8”.
4. You must then determine an appropriate size screw to penetrate the headliner and
securely mount the brackets to the roof brace. When selecting a screw, take care to
ensure that it is capable of supporting the weight of the light and it will not penetrate
the roof of the vehicle.
5. Carefully drill any necessary pilot holes in your roof brace.
CAUTION: Take care to
ensure when selecting a screw and drilling the hole that it is capable of
supporting the weight of the light and that it does not penetrate the roof of the
vehicle.
6. Install the screws through each bracket.
7. If necessary, adjust your light as described in Step 5 on the previous page.
Alternate
Mounting
Hole
Universal Mounting (CONT'D)
