-11-
10. With acorn nuts still slightly
loose, slide the light as close
to the front windshield as
possible. Once it is touching
the window, tighten the two
acorn nuts that secure the
two brackets together.
11. Repeat Steps 2 -10 for the
opposite side of the vehicle.
CAUTION:
Take extreme caution not to over tighten the
screws!!! Over tightening of the screws can strip the holes.
3.
Once all of the brackets are securely tightened, check your mount to ensure the
desired angle is achieved. Stand in front of the vehicle and inspect the light
through the front windshield. The screws may be loosened slightly to allow for any
final adjustments necessary.
4.
After all the necessary adjustments are made retighten all the screws.
CAUTION:
Take extreme caution not to over tighten the screws!!! Over
tightening of the screws can strip the holes and result in a
faulty mount.
.
Star Headlight & Lantern Co., Inc. assumes no
responsibility for the secure mounting of this light. It is the
responsibility of the installer and/or owner to ensure the
lightbar is mounted securely. Check your light every time
you enter the vehicle to ensure that it is mounted securely.
CAUTION!!! Once the light is secured, route your cord such that
it does not interfere with the vision of the driver or the operation
of the steering wheel, gear shifter, and/or any airbags.
1. After the top of the light is
touching the windshield, slide
the baffle forward until it
satisfactorily blocks any
reflected light.
2. Tighten the Baffle Adjusting
Screws to secure the baffle
in place .
Vehicle Specific Mounting Brackets (CONT'D)
BAFFLE ADJUSTMENT
(All Models)