Stanton T.90 USB, User Manual, Page: 6 / 12

4
16. ANTI SKATE KNOB -
When a record is playing, a force is
generated drawing the stylus towards the center of the record. This
control compensates for that force and needs to beset to the same
value as the counter weight pressure ring.
17. TONE ARM BASE -
The tone arm base includes tone arm rest.
18. COUNTERWEIGHT -
Use this to balance the tone arm and to adjust
the stylus pressure. See “tone arm and cartridge settings” for proper
adjustments.
19. 45-RPM ADAPTOR HOLDER -
Place on the attached 45-rpm
adaptor here. Push down the rear side of 45 rpm adaptor to take it
20. EXTRA STYLUS HOLDER -
Place extra headshell here.
21. PHONO/LINE OUTPUT L & R -
This is the standard analog output
(RCA jacks) which can be connected either to a phono or line input on
any DJ mixer, depending on the setting of the phono / line selector.
22. PHONO/LINE SWITCH -
Switch phono/line output.
23. USB SOCKET-
After connecting the Turntable to the computer via
USB, you can record your vinyl to your hard disk using the included
Cakewalk Pyro 5
software.
Note:USB cable limit within 3m.
24. DIGITAL OUTPUT -
Use this output to connect your T.90 to any
SPDIF in equipped digital device.
25. POWER CORD CONNECTOR -
Used to connect the included power
cord.
26. POWER SWITCH -
This switch turns the power on or off, including
the motor and audio signal
Audacity is free software, licensed under the GNU General Public License(GPL). More information as well as open source code can be found on the web at
http://audacity.sourceforge.net /
* Please ensure you have installed the software before starting.
SET UP PROCEDURE
1. Connect an input source to the unit.
2. Connect the USB lead to your computer.
3. Install the Audacity recording software by visiting http://audacity.sourceforge.net /
4. Open the Audacity program.
5. Go to EDIT then PREFERENCES.
6. Click
AUDIO I/O
tab.
7. Choose playback device
USB AUDIO CODEC
from the drop down menu.
8. Choose recording device
USB AUDIO CODEC
from the drop down menu.
9. Choose
CHANNELS (2 STEREO).
10. Tick
SOFTWARE PLAY THROUTH BOX.
11. Click
OK.
RECORDING & SAVING TRACKS
1. Play the track to be recorded.
2. Click the
RED
record button on the computer.
3. When you have finished the recording, click the
YELLOW
stop button.
4. You can now click
FILE
and choose to save your recording.
5. Click the
GREEN
play button to playback your finished recording.
CONTROLS OVERVIEW
AUDACITY SOFTWARE OVERVIEW ( for MAC and PC users )