Stanley Tabs 25222, User Instructions

Page: 9 / 27

Mounting the bracket with Dual Lock ® fastener
1. Clean the surface with rubbing alcohol and clean rag. Let it dry
thoroughly before beginning your installation. Use the level to
position the bracket straight on the mounting surface. Be sure to
leave enough room above the bracket for removal of the monitor
2. Peel off the film on the back of
the 2
1 /
2
" piece of Dual Lock ®
fastener. Press the fastener
firmly to the wall.
3. Line up the piece of Dual
Lock
® fastener on the
headboard with the two pieces
on the bracket (Figure 1).
Fasten them together by
firmly pressing. You will
hear a "click" when the Dual
Lock
® fastener is properly
mounted.
A word about Dual Lock
®
fastener
According to the manufacturer, if Dual Lock
®
fastener is used properly
it can withstand up to 1,000 closures before replacement is necessary.
Inspect each piece of Dual Lock
®
fastener regularly and replace each
piece at the first sign of wear.
A piece of film covers the adhesive on the back
of each piece of Dual Lock
® fastener (Figures 2
and 3). The adhesive is very strong; – it was
manufactured for one mount only so never reuse
a piece of Dual Lock
® fastener. If you remove a
piece of Dual Lock ® fastener from the mounting
surface or bracket, replace it with a new piece of
Dual Lock
® fastener.
To remove Dual Lock ® fastener:
The adhesive on Dual Lock ® fastener bonds well
enough to the mounting surface that there is a
possibility it may damage your wall when you
remove it. Gently grab a corner of the fastener
and ease your fingers under it. Roll the Dual
Lock
® fastener slowly off the mounting surface.
Figure 1
7
Recessed
areas
Dual Lock
®
fastener
Figure 2
Figure 3