9
Installing the wire bracket (Model 25223)
To attach the bracket to the TABS
®
monitor, position the bracket so that
one of the hooks clips over the bottom of one of the rails on the
backside of the monitor. By pulling on the top end of the bracket, it will
clip over the top of the rail. Do the same on the other side of the
monitor. You can then place the monitor over the back of a chair. See
also Figure 6.
Wheelchair and door applications
Your TABS
®
mobility monitor can also be used to monitor a person in a
wheelchair or to monitor an interior door. Contact your local distributor
or call TABS
®
Customer Service at 800-824-2996 to obtain the
Wheelchair Bracket Assembly, Easy-Clip Wheel Chair Bracket, or the
Door Mount Kit.
Figure 6
Slide wire bracket
over rails as
shown
