8
ENGLISH
(Original instructions)
u
Let the blade run freely for a few seconds before starting
the cut.
u
Apply only a gentle pressure to the tool while performing
the cut.
u
Work with the shoe pressed against the workpiece.
u
As some splintering along the line of cut on the top side of
the workpiece cannot be avoided, cut on the side where
splintering is acceptable.
u
Where splintering is to be minimised, e.g. when cutting
laminates, clamp a piece of plywood onto the top of the
workpiece.
u
Support large panels to minimize the risk of blade pinching
and kickback. Large panels tend to sag under their own
weight.
u
Supports must be placed under the panel on both sides,
near the line of cut and near the edge of the panel being
cut.
u
Never hold piece being cut in your hands or across your
leg.
u
Secure the workpiece to a stable platform using clamps. It
is important to support the work properly to minimize body
exposure, blade binding, or loss of control.
Accessories
The performance of your tool depends on the accessory used.
Stanley Fat Max accessories are engineered to high quality
standards and designed to enhance the performance of your
tool. By using these accessories you will get the very best
from your tool.
Maintenance
Your tool has been designed to operate over a long period of
time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
Warning! Before performing any maintenance, switch off and
unplug the tool.
u
Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u
Regularly clean the motor housing using a damp cloth. Do
not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with normal
household waste.
Products and batteries contain materials that can be recov-
ered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
STSC1850
(Type 1)
Input
Voltage
V
dc
18
No-load speed
min
-1
0 - 4000
Max depth of cut
mm
53
Max depth of cut at 45º
bevel
mm
43
Blade diameter
mm
165
Blade bore
mm
16
Blade tip width
mm
2.0
Weight
kg
2.6
Charger
Not supplied
Input Voltage
V
AC
Output Voltage
V
DC
Current
A
Approx. charge time
min
Battery
Not supplied
Voltage
V
dc
Capacity
Ah
Type
L
pA
(sound pressure) 79 dB(A), Uncertainty (K) 3 dB(A)
L
WA
(sound power) 90 dB(A), Uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN 60745:
Cutting wood (a
h, W
) 2.4 m/s
2
, uncertainty (K) 1.5 m/s
2
Guarantee
Stanley Europe is confident of the quality of its products and
offers consumers a 24 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.
To claim on the guarantee, the claim must be in accordance
with STANLEY Terms and Conditions and you will need to
submit proof of purchase to the seller or an authorised repair
agent. Terms and conditions of the Stanley Europe 2 year
guarantee and the location of your nearest authorised repair
agent can be obtained on the Internet at www.2helpU.com, or
by contacting your local Stanley Europe office at the address
indicated in this manual.
