Stanley STEL805, Manual

Page: 8 / 14

8
wheel, not on the top or bottom of the wheel.Side pressure on
the wheel could lead to breakage of the wheel.
Maintenance
Your Stanley power tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.Your tool is not user-serviceable.
Take the tool to an authorized Stanley repair agent.
This tool should beserviced at regular intervals or when
showing a noticeable change in performance.
Lubrication
Stanley power tools are properly lubricated at the factory
and are ready for use. Tools should be relubricatedregularly ,
depending on usage. This lubrication should only be
attempted by trained power tool repair persons, such as
those at Stanley service centers or by other qualified service
personnel.
Cleaning
@
Warning: unplug the tool before you use a cloth to
clean the housing.With the motor running, blow dirt
and dust out of all air vents with dry air at least once
a week. Wear safety glasses when performing this.
Exterior plastic parts may be cleaned with a damp
cloth and mild detergent. Although these parts are
highly solvent resistant, NEVER use solvents.
Tool Care
Avoid overloading the machine.Overloading will result in a
considerable reduction in speed and efficiency and the unit
will become hot. In this event,run the machine at no load for
a minute or two until cooled to normal working temperature
by the built in fan. Switching your machine on and off whilst
under load will considerably reduce the life of the switch.
Important
To ensure product SAFETY and RELIABILITY, repairs,
maintenance and adjustment (other than those listed in
thismanual) should be performed by authorized service
centers or other qualified organizations, always-using
identicalreplacement parts. Unit contains no user serviceable
parts inside.
Accessories
Note: Accessory must be rated for use at speed equal to or
higher than nameplate RPM of tool with which it is beingused.
@
CAUTION: The use of any non-recommended acces-
sories may be hazardous.
Protecting The Environment
z
Should you find one day that your tool needs re-
placement, or if it is of no further use to you, think of
the protection of the environment. Stanley
recommends you to contact your local council for
disposal information.
Service Information
Notes





Stanley's policy is one of continuous improvement to our
products and, as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local Stanley dealers for range
availability.
Pictures of product may differ to actual unit. Some units do
not include side-handle &/or grinding wheel.
Stanley offers a full network of company-owned and authorized
service locations throughout Asia. All Stanley Service Centers
are staffed with trained personnel to provide customers with
efficient and reliable power toolservice.Whether you need
technical advice, repair, or genuine factory replacement parts,
contact the Stanley locationnearest to you.
The performance of any power tool is dependent upon the
accessory used. Stanley accessories are engineered to high
quality standards and are designed to enhance the
performance of power tool. By using Stanley accessories will
ensure that you get the very best from your Stanley tool.
Stanley offers a large selection of accessories available at our
local dealer or authorized service center at extracost.