9
ENGLISH
Sawing laminates
As the saw blade cuts on the upward stroke,
splintering may occur on the surface closest to the
shoe plate.
u
Use a fine-tooth saw blade.
u
Saw from the back surface of the workpiece.
u
To minimise splintering, clamp a piece of scrap
wood or hardboard to both sides of the
workpiece and saw through this sandwich.
Sawing metal
Be aware that sawing metal takes much more time
than sawing wood.
u
Use a saw blade suitable for sawing metal. Use
a fine-tooth saw blade for ferrous metals and a
coarser saw blade for non-ferrous metals.
u
When cutting thin sheet metal, clamp a piece of
scrap wood to the back surface of the
workpiece and cut through this sandwich.
u
Spread a film of oil along the intended line of
cut.
Accessories
The performance of your tool depends on the ac-
cessory used.Stanley accessories are engineered
to high quality standards and designed to enhance
the performance of your tool. By using these ac-
cessories you will get the very best from your tool.
Blades
The saw will accept a blade up to 30 cm long.
Always use the shortest blade suitable for your
project but long enough to keep the blade cutting
through the material. Longer blades are more likely
to be bent or damaged during use. During opera-
tion some longer blades may vibrate or shake if the
saw is not kept in contact with the workpiece.
Maintenance
Your Stanley corded/cordless appliance/tool has
been designed to operate over a long period of
time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool
care and regular cleaning.
Warning!
Before performing any maintenance on
corded/cordless power tools:
u
Switch off and unplug the appliance/tool.
u
Or switch off and remove the battery from the
appliance/tool if the appliance/tool has a
separate battery pack.
u
Or run the battery down completely if it is
integral and then switch off.
u
Unplug the charger before cleaning it. Your
charger does not require any maintenance
apart from regular cleaning.
u
Regularly clean the ventilation slots in your
appliance/tool/charger using a soft brush or dry
cloth.
u
Regularly clean the motor housing using a
damp cloth. Do not use any abrasive or
solvent-based cleaner.
u
Regularly open the chuck and tap it to remove
any dust from the interior (when fitted).
Protecting the environment
Separate collection. This product must
not be disposed of with normal household
waste.
Should you find one day that your Stanley product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and
packaging allows materials to be recycled
and used again. Re-use of recycled mate-
rials helps prevent environmental pollution
and reduces the demand for raw materials.
Local regulations may provide for separate collec-
tion of electrical products from the household, at
municipal waste sites or by the retailer when you
purchase a new product.
Batteries
Z
Stanley batteries can be recharged many
times. At the end of their useful life,
discard batteries with due care for our
environment.
Service Information
Stanley offers a full network of company-owned
and authorized service locations throughout Asia.
All Stanley Service Centers are staffed with trained
personnel to provide customers with efficient
and reliable power tool service.Whether you
need technical advice, repair, or genuine factory
Summary of Contents for STCT1860
Page 1: ...STCT1860 English 3 繁體中文 11 한국어 18 ...
Page 2: ...2 A B E F C D ...
Page 3: ...3 G H I ...