background image

NEVER LEAVE A FAN  UNATTENDED WHILE 

OPERATING OR WHILE CONNECTED TO A 

POWER SOURCE 

© 2017, Obelis S.A Registered Address: 

Bd. Général Wahis, 53 1030 Brussels, Belgium 

4

30” PEDESTAL FAN: ST-30P-DDF-E

Installation and Assembly

Tools Needed:

Pliers

Phillips head screwdriver

Flat head screwdriver

10mm / adjustable wrench

Parts Included In Box:

(1) Base

(1) Front Guard

(1) Rear Guard

(1) Motor Assembly

(1) Fan Blade Assembly

(1) Locking Collar

(1) Upper Support Pole

(1) Lower Support Pole

1.  Place the base on level ground
2.  Mount the support pole to the base. Make 

sure the holes line up.

3.  Secure tightly with 5 flange screws using the 

wrench.

4.  Put down the base cover.
5.  Loosen the locking collar screw using the 

adjustable handle. Extract the upper support 

pole slowly to adjust the height of the fan. 

Tighten the locking collar with the adjustable 

handle.

6.  Mount the motor assembly to the connector 

on the upper support pole. Make sure the 

holes line up

7.  Secure motor assembly with Bolt (M12*40) 

and Nut (M12). Tighten the bolt firmly using 

the wrench.

8.  Slide the rear guard on to motor assembly 

and secure it with 4 flange screws. Tighten 

the screws firmly using the wrench.

9.  Loosen the screw on the back of the fan 

blade assembly using the Allen wrench (Hex 

Wrench). Slide the fan blade assembly onto 

the motor shaft.

10. Attach the front guard to the back guard and 

secure with the fasteners on the front guard.

NOTE: This model CAN NOT be wall mounted

 Figure 19:  Attaching Rear Guard to Motor

Rear Guard

Motor

Motor Assembly

Pivot Bolt

Nut

Upper Support Pole

 Figure 18:  Attaching Motor to Motor Support Assembly

Do NOT slide fan blade screw 

beyond the groove on the shaft! 

This will cause the fan blade to not spin properly 

and can cause damage to your fan! Be sure that 

fan shaft is flush with front of fan blade assembly.

CAUTION

Summary of Contents for ST-12F-DDF-E


















Reviews: