Rev: Jan 2018
10 of 18
®
BEAST Electric Pressure Washers
OPERATION
CAUTION
A pressure washer produces a high pressure spray which
increases risk of injury and damage to unit.
Gun Kicks Back - Hold with both hands!
The trigger gun safety lock prevents the trigger from accidentally
being engaged. The safety feature DOES NOT lock trigger in the ON
position.
DO NOT secure spray gun in open position.
DO NOT leave spray gun unattended while machine is running.
NEVER use a spray gun which does not have a trigger lock or
trigger guard in place and in working order.
Always be certain spray gun, nozzles and accessories are correctly
attached.
Step 5:
Attach garden hose to water supply and turn water on.
Step 6:
Plug the unit into an outlet.
Make sure that the pressure
washer is the only device plugged into the outlet.
If plugging
into a garage outlet, make sure there are no other devices plugged
into any other outlets in the garage.. Press “TEST”. Then press
“RESET” to assure proper connection to power.
Step 7
IMPORTANT: Before turning the unit “ON”, depress the trigger to
bleed any trapped air out of the pump and hose.
Step 8
Release trigger and start the pressure washer by turning ON/OFF
switch to ON.
IMPORTANT: DO NOT turn the unit on without completing Step 7.
Step 9
Adjusting the spray
Turning the nozzle allows the use of several different spray tips.
Each spray tip provides a different spray pattern
as shown in Figure
below.
CAUTION:
Jet spray adjustment is very aggressive. Do not adjust while
spraying. We recommend that for most cleaning applications, a 20
degree spray angle should be used to avoid damage to the surface
being sprayed.
To prolong the life of the unit, it is recommended to
rest the unit 5 minutes after every 30 minutes of use.
Wider
spray angle
Narrower
spray angle
