manualshive.com logo in svg

Stanley MC521 Pro, Installation And Operation Manual

The Stanley MC521 Pro is a versatile and reliable tool designed for professionals and DIY enthusiasts alike. With its Quick Reference Manual, users can easily navigate through its impressive features and maximize its capabilities. Download this comprehensive manual for free from manualshive.com and unlock the full potential of the MC521 Pro.

Share
Download
background image

GENERAL DESCRIPTION 

Intended Use

This manual provides abbreviated descriptive information, wiring instructions, and tune-in instructions for the 

MC521 PRO controller used with Magic-Swing™, Magic-Force™, and Bifold operators. The manual is intended as a 

quick-reference guide. Attachment 7 illustrates the MC52I PRO controller controls and indicators.

Applicability

This manual is applicable on MC521 PRO control box used with Magic-Swing™, Magic-Force™, and Bifold operators.

Precautions

The Magic-Touch time delay must be greater than 5 seconds to ensure compliance with ANSI A156.19 or most current ANSI/

BHMA standards, “American National Standard for Power Assist and Low Energy Power Operated Doors,” specifications. 
All ANSI/BHMA and UL Requirements in Attachment 8 must be met before the door is put into operation.

1

Cop

yr

ight 2017, S

tanley Ac

cess T

echnologies, LL

C. . All rights r

es

er

ved. R

epr

oduction 

 

in whole or in p

ar

t without the expr

ess wr

itt

en permission o

f S

tanley is pr

ohibit

ed.

03.23.2017

2       Document # 204090  REV D  •  www.stanleyacces.com • 1.800.7.ACCESS 

Table of Contents

General Description ..........................................................................................................................2

Intended Use ..............................................................................................................................................................

2

Applicability ................................................................................................................................................................

2

Precautions..................................................................................................................................................................

2

Features and Functions ..........................................................................................................................................

3

Wiring Instructions ...........................................................................................................................4

Evaluate Power Requirements .............................................................................................................................

4

Connecting Main Power Wiring ..........................................................................................................................

4

Connecting Breakout Status Signal Wiring (Magic-Swing Operators) ................................................

4

Connecting Breakout Status Signal Wiring (Magic-Force Operators) .................................................

6

Wiring the Operator Switch Module (Magic-Force Operators) .............................................................. 7

Wiring the Operator for Required Handling (Magic-Force Operators) ............................................... 8

Wiring the “On/Off/Hold Open” Switch and Power Switch ..................................................................... 8

Wiring the Door Activation or Safety Device ................................................................................................. 8

Wiring Swing Guard T .............................................................................................................................................

9

Wiring Bodyguard-T ................................................................................................................................................

9

Wiring Superscan-T .................................................................................................................................................

9

Wiring Holding Beam..............................................................................................................................................

9

Tune-In Instructions ........................................................................................................................10

Initial Tune-In Settings .........................................................................................................................................10 

Tuning In the MC521 PRO Controller Using a “Handheld Device” .....................................................10

Tuning in the MC521 PRO Using the Controller Pushbuttons..............................................................13 

Index Tables ..............................................................................................................................................................14

Final Tune-In Adjustments ..................................................................................................................................

20

Spare Parts List ................................................................................................................................21

Attachments ....................................................................................................................................22

Attachment 1: Breakout Status Wiring for Magic Swing Operators .............................

22

Attachment 2: Magic-Force Wiring Diagram .....................................................................................

23

Attachment 3: Magic-Force Wiring Diagram .....................................................................................

24

Attachment 4: Magic-Swing Wiring Diagram ....................................................................................25

Attachment 5: Safety Logic Wiring Diagrams ....................................................................................

26

Attachment 6: MC521 PRO Terminal Block Connections ............................................................

40

Attachment 7: MC521 PRO Controls and Indicators......................................................................41

Attachment 8: ANSI/BHMA and UL Compliance Requirements ..............................................

43

Attachment 9: Hand held Device Troubleshooting Aid................................................................45

Attachment 10: Recommended Values ..................................................................................................47

Attachment 11: MC521 Pro Controller Fine Tuning .......................................................................53

Summary of Contents for MC521 Pro

























































Reviews:

No comments

Related manuals for MC521 Pro

Nidec Leroy-Somer R180 Installation And Maintenance Manual preview
Leroy-Somer R180
Brand: Nidec Pages: 20
FAAC E550 Manual preview
E550
Brand: FAAC Pages: 12
DAV TECH DA 250 Installation And Maintenance Manual preview
DA 250
Brand: DAV TECH Pages: 10
Jafar 3500 Operating Manual preview
3500
Brand: Jafar Pages: 9
Samsung SPC-6000 Quick Setup Manual preview
SPC-6000
Brand: Samsung Pages: 6
Samsung MWR-WE10N Manual preview
MWR-WE10N
Brand: Samsung Pages: 32
Samson 327 Translation Of The Original Operating Instruction preview
327
Brand: Samson Pages: 73
Paradox Magellan REM2 Reference And Installation preview
Magellan REM2
Brand: Paradox Pages: 2
Polycom VVX Series Basic Troubleshooting preview
VVX Series
Brand: Polycom Pages: 2
Watts KONTACT Manual preview
KONTACT
Brand: Watts Pages: 17
TUYA WBR3L Datasheet preview
WBR3L
Brand: TUYA Pages: 28
Toptech MultiLoad II EXL Installation Manual preview
MultiLoad II EXL
Brand: Toptech Pages: 83
Kohzu Precision RC-010 Manual preview
RC-010
Brand: Kohzu Precision Pages: 58
Flying Industry Development S1PF-DC12 Quick Manual preview
S1PF-DC12
Brand: Flying Industry Development Pages: 2
NCE CAB-04p Operation Manual preview
CAB-04p
Brand: NCE Pages: 4
Advantech RISC Module SOM-A2552 User Manual preview
RISC Module SOM-A2552
Brand: Advantech Pages: 40
OGI TotalArc BMS 460346 SOLAR POWER Operator'S Manual preview
TotalArc BMS 460346 SOLAR POWER
Brand: OGI Pages: 28
AUMA ACV 01.2 Manual preview
ACV 01.2
Brand: AUMA Pages: 168

Brands by name

Popular brands

Load more brands