ENGLISH
9
5. STORAGE
The pneumatic-hydraulic tool embedded in a shipping container must be stored in environment with relative
humidity to 70% and temperature ranging from +5
o
C to +40
o
C, without aggressive evaporation of salts, acids
and caustics.
6. COMPLETE TOOL EQUIPMENT
Replaceable anvils and mandrels located in a plastic bag, Operations manual, Certificate of warranty.
7. OPERATIONS AND WARRANTY CONDITIONS
7.1 OPERATION CONDITIONs
For reliable function of the tool we recommend to use treated compressed air. Treated compressed air means
compressed atmospheric air bare of solid particles and water, reduced to required pressure and lubricated with
anti-corrosive oil. Immediately before putting the tool into service, the regulator valve must not exceed the
maximum outlet pressure of
0,7 MPa
. It is recommended to fit the air line with an air filter and lubricator.
Equivalent sound-pressure level of noise A, L
pAeq,T
does not exceed 68,6 dB(A), still it is recommended to use ear
protectors during continuous and long-term operation.
Aggregated weighted vibration acceleration level L
avw,T
= 113,8 dB re 10
-6
m.s
-2
. The cumulative weighted
effective value of the vibration acceleration a
vw,T
= 0,49 m.s
-2
.
The trigger enables safe control of the tool with a force max. 35 N < 50 N without releasing the grip-handle
according to the health regulation.
7.2. WARRANTy CONDITIONs
For reliable and safe function of the tool it is necessary to adhere to instructions and principles stated above.
For the warranty period the customer must not perform any alterations other than those permitted by the
manufacturer, see paragraph 2.1, 3.1, 3.2. Other non-detachable parts are secured with paint. In case of
neglecting this protection the manufacturer shall not admit possible warranty repairs. To admit warranty repair
the customer must submit confirmed warranty certificate of the tool, Certificate of quality and completeness
or proof of purchase. The warranty period is 24 months from the day of purchase confirmed in the Warranty
certificate if the purchase contract does not state otherwise.
Warranty is valid provided that the following:
•
General safety instruction and principles (paragraph 1)
•
Tool operation (paragraph 2.4)
•
Daily and weekly maintenance (paragraph 3.1 and 3.2)
•
Storage (paragraph 5)
•
Operations and waranty conditions (paragraph 7)
Warranty does not apply to quickly expendable parts (see paragraph 4.2.)
