Stanley GD50, User Manual

Page: 15 / 20

GD50 User Manual ◄ 15
Capacity (Rod Anvil)
1/2 to 5/8 inch/12 to 16 mm diameter rod (model GD50132RF)
3/4 to 1 inch/19 to 25 mm diameter rod (model GD50133RF)
Pressure Range .............................................................................................................. 1500–2000 psi/105–140 bar
Maximum Back Pressure ...................................................................................................................... 250 psi/17 bar
Flow Range ................................................................................................................................ 7–9 gpm/26–34 lpm
Couplers ......................................................................................... HTMA/EHTMA Flush Face Type Male & Female
Hose Whips ...........................................................................................................................................................Yes
Weight ................................................................................................................................................. 57.3 lbs./26 kg
Overall Length ............................................................................................................................. 25.5 inches/64.8 cm
Overall Width .................................................................................................................................. 10 inches/25.4 cm
Maximum Fluid Temperature .................................................................................................................. 140 °F/60 °C
SERVICE TOOLS
DESCRIPTION PART NUMBER
O-ring Tool Kit: General Service of Seals .......................................................................................................... 04337
Split Rings: Used with 04910 ............................................................................................................................. 04908
Flow Sleeve Removal Tool ................................................................................................................................ 04919
Flow Sleeve Removal Tube: Used with 04908 & 05508 .................................................................................... 04910
Bearing Puller Kit: General Bearing Pulling ....................................................................................................... 05064
Accumulator Disassembly Tool: Used with 04910 ............................................................................................. 05508
Tamper Sleeve Tool: Used to Pull Porting Block from Valve Block .................................................................... 01120
Accumulator Cylinder Puller: An Aluminum Disk (handy for protecting parts when using an arbor press ......... 05640
SPECIFICATIONS