background image

10

E

Specifications

Range

6in to 330ft (.15m to 100m)

Measuring Accuracy*

± 1/16in (± 1.5mm)*

Resolution**

1/16in (1mm)**

Laser Class

Class 2 (IEC/EN60825-1: 

2007/

2014)

Laser Type

≤ 1.0mW @ 620-690nm

Laser/Backlight Automatic Switch-off

After 30s

Unit Automatic Switch-off

After 90s

Continuous Measuring

Yes

Area

Yes

Volume

Yes

Pythagoras 2-Point

Yes

Pythagoras 3-Point

Yes

Endpiece to measure from corners or 

grooves

Yes. Flip open the endpiece at the bottom of the tool when 

you need to fit the tool into corners or grooves that are not 

at 180° angles. If a corner is at 90°, the endpiece can be 

used to hold the tool up against something.

Battery Life (3 x AAA)

Up to 3000 Measurements (2500 with 

)

Dimension (H x D x W)

4.72 x 1.91 x 1.02in (120 x 48.5 x 26mm)

Weight (with Batteries)

9.88oz (280g)

Storage Temperature Range

13° F ~ 158° F (-25° C ~ +70 C)

Operating Temperature Range

32° F ~ 104° F (0° C ~ +40° C)

*Measuring Accuracy depends on the current conditions:

•  Under favorable conditions (good target surface and room temperature), up to 33ft (10m).
•  Under unfavorable

 conditions (bright sunlight, a very weak reflecting target surface, or large temperature fluctuations), the 

error can increase to ± 0.002 in/ft (± 0.2mm/m) for distances over 33ft (10m).

**Resolution

 is the finest measurement you can see. In inches, that is 1/16". In mm, that is 1mm.

Summary of Contents for Fatmax TLM330S














Reviews: