background image

21 -  ENG

ONE YEAR LIMITED WARRANTY ON PUMP AND FRAME

STANLEY FATMAX

® 

warrants to the original purchaser that the pump of the 

STANLEY 

FATMAX

®  

pressure washer covered under this warranty is free from manufacturer’s defects 

in material and workmanship for one year from the date of purchase. The one year limited 

warranty applies to the pump only.

STANLEY FATMAX

® 

will repair or replace, at 

STANLEY FATMAX

®

's option, products or 

components which have failed within the above warranty periods. Service will be scheduled 

according to the normal work flow and business hours at the service center location, and the 
availability of replacement parts. All decisions of 

STANLEY FATMAX

®

 

with regard to this 

limited warranty shall be final.
This warranty gives you specific legal rights, and you may also have other rights which vary 

from state to state.

ENGINE WARRANTY

The engine, emission control system and related components are covered under the terms 

and conditions outlined by the engine manufacturer’s warranty and are the sole responsibility 

of the engine manufacturer.  A copy of the engine manufacturer’s warranty has been 
provided to you with your 

STANLEY FATMAX

®

 pressure washer. Please consult the engine 

manufacturer’s warranty to process a claim or obtain service to the engine, emission control 

system or related components.

RESPONSIBILITY OF ORIGINAL PURCHASER (INITIAL USER):

To process a warranty claim on your 

STANLEY FATMAX

®

 

pressure washer, report the

concern to 

1-877-362-4271 or [email protected]

 for authorization

and direction to the nearest authorized service centre in your area.

Retain original cash register sales receipt as proof of purchase for warranty work.

Use reasonable care in the operation and maintenance of the product as described in

the Owners Manual(s).

THIS WARRANTY DOES NOT COVER:

• 

Merchandise sold as reconditioned, used as rental equipment, or floor or display models.

Merchandise that has become damaged or inoperative because of ordinary wear,

misuse, cold, heat, rain, excessive humidity, water quality, freeze damage, use of

improper chemicals, negligence, accident, failure to operate the product in accordance

with the instructions provided in the Owners Manual(s) supplied with the product,

improper maintenance, the use of accessories or attachments not recommended by

STANLEY FATMAX

®

 

, or unauthorized repair or alterations.

Repair and transportation costs of merchandise determined not to be defective.

Damage due to chemical deterioration, scale build up, rust, corrosion or thermal
expansion

Costs associated with assembly, required oil, adjustments or other installation and start-

up costs.

Expendable parts or accessories supplied with the product which are expected to

become inoperative or unusable after a reasonable period of use, including but not

limited to springs, nozzles, o-rings, washers, and similar accessories.

Merchandise sold by 

STANLEY FATMAX

®

 

which has been manufactured by and

identified as the product of another company, such as gasoline engines. The product

manufacturer’s warranty, if any, will apply.

ANY INCIDENTAL, INDIRECT OR CONSEQUENTIAL LOSS, DAMAGE,

OR EXPENSE THAT MAY RESULT FROM ANY DEFECT, FAILURE OR

MALFUNCTION OF THE PRODUCT IS NOT COVERED BY THIS WARRANTY.

Some states do not allow the exclusion or limitation of incidental or consequential

damages, so the above limitation or exclusion may not apply to you.

Summary of Contents for FATMAX SXPW3425

























Reviews: