15 - ENG
WARNING: Flying object could cause risk of serious injury. Ensure
nozzle is completely inserted in quick-connect socket and quick-connect
collar is fully engaged (forward) before squeezing gun trigger.
NOZZLE
COLOR
SPRAY
PATTERN
USES
SURFACES*
Red
0˚
powerful pinpoint
for spot cleaning
of hard, unpainted
surfaces or for
high reach areas
unpainted metal
or concrete;
DO NOT use on wood
Yellow
15˚
intense cleaning
of unpainted
hard surfaces
grills, driveways, concrete
or brick walkways,
unpainted brick or stucco
White
40˚
cleaning of painted
or delicate surfaces
auto/RV, marine, wood,
painted brick and stucco,
vinyl, painted siding
Black
low pressure
applies cleaning
solutions
Low pressure spray is
safe on all surfaces.
Always verify compatibility
of cleaning solution
prior to use.
*NOTICE:
The high pressure spray from your pressure washer is capable of causing
damage to surfaces such as wood, glass, automobile paint, auto striping and trim,
and delicate objects such as flowers and shrubs. Before spraying, check the item to
be cleaned to assure yourself that it is strong enough to resist damage from the force
of the spray.
HOW TO APPLY CHEMICALS/CLEANING SOLVENTS (FIG. 9)
Applying chemicals or cleaning solvents is a low pressure operation.
NOTE:
Use only
soaps and chemicals designed for pressure washer use.
Do not use bleach.
To Apply Chemicals:
1. Remove the cap from the detergent tank (F) and fill
F
9
the detergent tank with cleaning solvent. Replace cap
on deteregent tank.
NOTE:
For every 7 gallons of
water pumped 1 gallon of chemical/cleaning
solution will be used.
2. Install the black low pressure nozzle into the quick
connect fitting of the spray wand and rotate the
adjustable pressure regulator (L) to the MAX pressure
setting as shown in Figure 6. See
How To Use Spray Wand
paragraph in
this section.
NOTE:
To apply chemicals the black low pressure nozzle must be installed and
the adjustable pressure regulator must be in the MAX pressure setting as shown in
Figure 6.
