5
ENGLISH
(Original instructions)
u
Do not store in locations where the
temperature may exceed 40 °C.
u
Charge only at ambient temperatures
between 10 °C and 40 °C.
u
Charge only using the charger
provided with the tool.
u
If the appliance is to be stored unused
for a long period, the batteries should
be removed.
u
When disposing of batteries, follow
the instructions given in the section
“Protecting the environment”.
p
Do not attempt to charge dam-
aged batteries.
Chargers
(not supplied)
u
Use your Stanley Fat Max charger only
to charge the battery in the tool with
which it was supplied. Other batteries
could burst, causing personal injury
and damage.
u
Never attempt to charge non-
rechargeable batteries.
u
Have defective cords replaced
immediately.
u
Do not expose the charger to water.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or an
authorised STANLEY FATMAX Service
Centre in order to avoid a hazard.
u
Do not open the charger.
u
Do not probe the charger.
$
The charger is intended for
indoor use only.
Electrical safety
#
Your charger is double insu-
lated; therefore no earth wire
is required. Always check that
the mains voltage corresponds
to the voltage on the rating
plate. Never attempt to replace
the charger unit with a regular
mains plug.
u
If the supply cord is damaged, it must
be replaced by the manufacturer or
an authorised STANLEY FAT MAX
Service Centre in order to avoid a
hazard.
Warning!
Never attempt to replace the
charger unit with a regular mains plug.
Labels on appliance
The following symbols appear on this appliance along with the
date code:
+
Warning!
To reduce the risk of injury, the user
must read the instruction manual.
Features
This tool includes some or all of the following features.
1. On/off power switch
2. Main handle
3. Power head
4. Tank
5. Tank latch
6. Intake port
7. Battery port
8. Vacuum hose
9. Hose clip
10 . Side exhaust port
11. Crevice tool
12. Wide nozzle tool
Assembly
Charging the battery (not supplied) (Fig. A)
The battery needs to be charged before first use and
whenever it fails to produce sufficient power on jobs that were
easily done before.
The battery may become warm while charging; this is normal
and does not indicate a problem.
