4 ► BPP060F User Manual
WARRANTY
DUBUIS and STANLEY Infrastructure (hereinafter called “Stanley”), subject to the exceptions contained below,
warrants new tools for a period of one year from the shipping date from Stanley, to be free of defects in material and/
or workmanship at the time of de-livery. Stanley will, at its option, repair or replace any tool or part of a tool, or new
part, which is found defective upon examination by a Stanley authorized service outlet or by Stanley’s factories in
Blois, France or Milwaukie, Oregon USA.
HIGH PRESSURE TOOLS: High pressure tools (branded “DUBUIS”) such as cable cutters, crimpers, hydraulic high
pressure pumps, have been designed for NON INTENSIVE use. Warranty is limited to 10.000 cycles on manual tools
and 15.000 cycles for energized tools.
FULL PAYMENT: A Guaranty claim doesn’t not allow to partly or totally defer the payment of the equipment.
WARRANTY CLAIMS
: To benefit from Stanley warranty, individual has to inform without any delay Stanley about
the defects of the equipment in material and/or workmanship. It is also requested to supply with the warranty claim
documentation which proves the sale/purchase of the tool or the tools’ first date of usage and serial number. The
term “DOCUMENTATION
” as used in this paragraph is defined as a bill of sale, or letter of intent from the first retail
customer.
RESPONSIBILITY: Equipment users must take all necessary security measures.
EXCEPTIONS FROM WARRANTY
FREIGHT COSTS: Freight costs to return parts to Stanley, if requested by Stanley for the purpose of evaluating a
warranty claim for warranty credit, are covered under this policy if the claimed part or parts are approved for warranty.
Freight costs for any part or parts which are not approved for warranty credit will be the responsibility of the individual.
DIES & CUTTING ACCESSORIES: Dies & cutting accessories such as breaker tool bits, dies, blades … are warranted
to be free of de-fects in material and or workmanship at the time of delivery only.
ITEMS PRODUCED BY OTHER MANUFACTURERS: Components which are not manufactured by Stanley and are
warranted by their respective manufacturers.
Costs incurred to remove a Stanley manufactured component in order to service an item manufactured by other
manufacturers.
REPAIRS, ALTERATIONS, MODIFICATIONS
: Alterations or modifications to any tool or part. All obligations under this
warranty shall be terminated if the new tool or part is altered or modified in any way.
Any failure or performance deficiency attributable to repairs by anyone which in Stanley’s sole judgment caused or
contributed to the failure or deficiency.
NORMAL WEAR:
Any failure or performance deficiency attributable to normal wear and tear such as tool bushings,
retaining pins, wear plates, bumpers, retaining rings and plugs, rubber bushings, recoil springs, seals, guiding rings, …
INCIDENTAL / CONSEQUENTIAL DAMAGES: To the fullest extent permitted by applicable law, in no event will
STANLEY be liable for any incidental, consequential or special damages and/or expenses.
FREIGHT DAMAGE: Damage caused by improper storage or freight handling.
LOSS TIME: Loss of operating time to the user while the tool(s) is out of service.
IMPROPER OPERATION:
Any failure or performance deficiency attributable to a failure to follow the guidelines and/or
procedures as outlined in the tool’s operation and maintenance manual.
MAINTENANCE
: Any failure or performance deficiency attributable to not maintaining the tool(s) in good operating
condition as out-lined in the Operation and Maintenance Manual.
HYDRAULIC PRESSURE & FLOW, HEAT, TYPE OF FLUID
: Any failure or performance deficiency attributable
to excess hydraulic pressure, excess hydraulic back-pressure, excess hydraulic flow, excessive heat, or incorrect
hydraulic fluid.
MIS-APPLICATION
: Any failure or performance deficiency attributable to mis-application. “Mis-application” is defined
as usage of products for which they were not originally intended or usage of products in such a matter which exposes
them to abuse or acci-dent, without first obtaining the written consent of Stanley.
PERMISSION TO APPLY ANY
PRODUCT FOR WHICH IT WAS NOT ORIG-INALLY INTENDED CAN ONLY BE OBTAINED FROM STANLEY
ENGINEERING.
