10 ► BPP060F User Manual
USING THE TOOL
Set the Trigger Lock
BEFORE
inserting
or removing dies from the Crimping Head.
USING THE BPP060F
DO NOT CRIMP LIVE CABLES
KEEP HANDS CLEAR OF
THE MOVING PARTS
Press and hold the trigger until the die is crimped.
The InteLED flashing green : good crimping.
Press and hold the pressure release until the
return of the piston. Open the crimping jaw.
Trigger
Pressure release
Note: Release the trigger to immediately
stop the tool. Press the pressure release
at any time to open the jaws.
Set the trigger lock.
Release the trigger lock.
Insert battery.
Pull out the jaw pin and open the crimping
jaw. Put the connector with the cable inserted
between the dies. Close the crimping jaw and
lock the jaw pin into place
Jaw Pin
Crimping Jaw
BAD POSITION OF
THE CONNECTOR
GOOD POSITION OF
THE CONNECTOR
