14 ► DL07 User Manual
SPECIFICATIONS
Drive Size ............................................................................................................. 1/2 inch / 1.3 cm 3-Jaw Adjustable
5/8 -16 THD Chuck
Drill Torque ......................................................................................................20 ft lbs / 27 Nm at 2000 psi / 140 bar
Drill Speed .......................................................................................................................1000 rpm at 8 gpm / 30 lpm
RPM Range .................................................................................................................................................350–1500
Weight
.....................................................................................................................................................8 lbs / 3.6 kg
Overall Length ....................................................................................................................................9 inch / 22.9 cm
Width
....................................................................................................................................................3.5 inch / 9 cm
Motor ...............................................................................................................................................................Integral
Pressure Range.............................................................................................................. 1000–2000 psi / 70–140 bar
Flow Range ................................................................................................................................... 4–12 gpm / 30 lpm
Optimum Flow ............................................................................................................................... 8 gpm / 15–34 lpm
System Type ...................................................................................Open and Closed Center, HTMA Type I, II and III
Porting ...................................................................................................................................................-8 SAE O-ring
Output Torque ................................................................................................................................500 ft lbs / 675 Nm
Connect Size and Type ....................................................................................................3/8 inch NPT Male Adapter
TORQUE AND DRILL SPEEDS
TORQUE
HYDRAULIC FLOW
DRILL SPEED
4 ft lbs @ 500 psi / .5 Nm @ 35 bar
3 gpm / 11.3 lpm
350 rpm
9 ft lbs @ 1000 psi / 1.2 Nm @ 70 bar
4 gpm / 15 lpm
475 rpm
14 ft lbs @ 1500 psi / 1.9 Nm @ 105 bar
6 gpm / 23 lpm
750 rpm
19 ft lbs @ 2000 psi / 2.6 Nm @ 140 bar
8 gpm / 30 lpm
10 gpm / 38 lpm
1000 rpm
1250 rpm
SOUND AND VIBRATION DECLARATION
Test conducted on DL0755001 operated at standard 5 gpm input
Measured A-weighted sound power level, Lwa (ref. 1pW) in decibels
87.6 dBA
Uncertainty, Kwa, in decibels
3 dBA
Measured A-weighted sound pressure level, Lpa (ref. 20 µPa) at operator’s position, in decibels
79.6 dBA
Uncertainty, Kpa, in decibels
3 dBA
Values determined according to noise test code given in ISO 15744, using the basic standard
ISO 3744
NOTE:
The sum of a measured noise emission value and its associated uncertainty represents
an upper boundary of the range of values which is likely to occur in measurements.
Declared vibration emission value in accordance with EN 12096
Measured vibration emission value: a
1.4 m/sec²
Uncertainty: K
0.35 m/sec²
Values determined according to ISO 8662-1, ISO 5349-1,2
