1.
Remove the Hot Plate as described on page
15.
2.
Remove the Baffle retaining clip by taking
out the two retaining screws.
3.
Swing the left hand Baffle over to the right at
the back and push it back to take the axle out
of the front socket. Then lift it upwards, clear
of the operating lever.
4.
Swing the right hand Baffle over to the left
and remove it in the same way.
5.
Replace in the reverse order.
1.
Open the burner compartment door and the
warming oven door.
2.
Remove the Oven side panel by taking out
the back screws and the front screw.
3.
Slacken the two Burner retaining screws
and lower the Burner gently until it is clear
of the collar.
4.
Tilt the Burner blast tube towards the right
making sure that the oil line and electrical
leads are free of obstructions.
5.
Remove the Burner through the warming
oven door and carry out the necessary
service.
6.
Replacement is the reverse of the above
sequence.
BAFFLE REMOVAL
BURNER REMOVAL
SWITCH OFF ELECTRICITY AND OIL SUPPLY
Fig.30
Fig.31
21
