EX5210R Exciter Installation & Configuration Guide
21
Configurations for Engine 5.3 and above
1.
Connect the Chained Exciter directly to the network via the LAN port.
2.
In the
General Settings
tab, under
Network Configuration
, make sure
Connected to Network
is checked.
3.
Select the
LF General
tab and configure the following parameters:
•
Under
General LF Parameters
select
LF Chaining
as
Chained
.
4.
Select the
Internal LF
tab and configure the following:
•
Select the desired
Transmission Range
of the Chained Exciter so that
the LF coverage is sufficient and some overlap exists between the
chained Exciters.
5.
Select the
General Settings
tab again and perform the following:
•
Under
Functional Modules
make sure that
Enable Internal LF
is
checked.
•
Under
Network Configuration
uncheck
Connected to Network
.
