13
RUNNING IN YOUR NEW
AIR COMPRESSOR
Before running in ensure that the following has been
completed:
1. Oil level is correct, see page 10.
4HEAIRCOMPRESSORHASBEENFULLYASSEMBLEDSEEPAGESn
Your new air compressor requires running in:
1. Plug the power cord into a standard
6!#POWERPOINT
2. Open the tank drain tap.
3. Start the air compressor using the
/./&&BUTTON
2UNTHEAIRCOMPRESSORFORAPPROXIMATELY
1 minute.
4HISENSURESTHATTHEAIRCOMPRESSORISFULLYLUBRICATEDUNDERNOLOAD
!FTERTHEMINUTESTOPTHEAIRCOMPRESSORUSINGTHE
/./&&BUTTON!LLOWTOCOOLAPPROXIMATELYMINUTES2ECHECKTHE
OILLEVELANDTOPUPIFNEEDEDADDITIONALOIL3!%NOTINCLUDED
Before starting your air compressor again ensure that the
tank drain tap is closed.
USING THE AIR COMPRESSOR
Before starting, run through this simple list:
/ILLEVELn#/22%#4TOPOFREDDOT
0LEASEREFERTODIAGRAM0ICPAGE
$RAINTAPnOPENANDDRAINTANK
$RAINTAPnCLOSEFULLY
#HECKPOWERLEADFORANYDAMAGE)FDAMAGEDHAVEREPLACEDBY
an authorised service centre.
0LUGAIRCOMPRESSORINTOASTANDARD6!MP
!#POWERPOINTANDTURN/.
,IFTTHEAIRCOMPRESSORBUTTONTOTURN/.
see page 12, Pic. 9.
!LLOWTHEAIRCOMPRESSORTOlLLTHEAIRTANK
8. Turn the power point OFF and disconnect the power lead from the
power point.
9. Connect your air hose and air tools.
2ECONNECTTOTHEPOWERLEADTOTHEPOWERPOINTANDTURN/.
4URNYOURAIRCOMPRESSOR/.
12. Set the outlet air pressure to match your air tools requirement.
/NCETURNEDANDYOUBEGINUSINGTHECONNECTEDAIRTOOLSTHE
air compressor will start and stop without warning. This is
CONTROLLEDBYTHEPRESSURESWITCH4HESEPRESSURESETTINGSARE
FACTORYSETANDSHOULDNOTBECHANGED
0UMPINGSTARTSATMINIMUM 03)ANDSTOPSATMAXIMUM 03)
/NCETHEINITIALPUMPUPSTAGEHASlNISHEDYOUCANADJUSTTHEOUTLET
air pressure to the tools recommended working pressure and open
the air tap fully.
