Stanford Research Systems SIM918, Operating And Service Manual, Page: 52 / 68

3 – 20 Remote Operation
10. The token mode to
OFF
.
*RST does not a
ff
ect PSTA , CONS , TERM , and all service-enable
registers ( *SRE , *ESE , CESE , RCSE , or OLSE ).
*RST Example:
CONS?
1
Identify *IDN?
Query the device identification string.
The identification string is formatted as:
Stanford Research Systems,SIM918,s/n******,ver#.###
where
SIM918
is the model number,
******
is a 6-digit serial number,
and #.### is the firmware revision level.
*IDN?
Example:
Stanford Research Systems,SIM918,s/n005432,ver2.1
Self Test *TST?
There is no internal self-test in the SIM918 after the power-on, so this
query always returns
0
.
*TST? Example:
0
Operation Complete *OPC(?)
Sets the OPC flag in the ESR register.
The query form *OPC? writes a
1
into the output queue when com-
plete, but does not a
ff
ect the ESR register.
*OPC?
Example:
1
Console Mode CONS(?) { z }
Set (query) the console mode
{
to z
=
( OFF 0 , ON 1 )
}
.
CONS causes each character received at the input bu
ff
er to be copied
to the output queue.
A reset does not alter CONS . The value in boldface above is the
power-on value. CONS is set to
OFF
upon Device Clear.
CONS ON Example:
SIM918 Precision Current Preamplifier