8
Standard Pump Operating Instructions and Parts Manual (OIPMS0611)
8 . Remove tri-clamp fitting (P/N: 833) .
9. Pull straight up separating the inner tube assembly (P/N:
8819 or P/N: 8820) from outer tube assembly (P/N: 8814 or
8815) (see Figure 7) .
10. Secure inner tube assembly (P/N: 8819 or P/N: 8820). Lightly
tap drive shaft (P/N: 8806 or P/N: 8807) up through inner
tube assembly (see Figure 8) .
11. Remove guide sleeve (P/N: 8811) from drive shaft (P/N: 8806
or P/N: 8807) (see Figure 9).
12. Secure drive shaft (P/N: 8806 or P/N: 8807) with grip-
locks . Remove coupling (P/N: 1004), bearings (P/N:
1038-2),bearing spacer (P/N: 1038-4) and secondary seal
(P/N: 8803) (see Figure 10) .
13 . Use a non-flammable, food safe cleaning agent to
manually clean remainder of pump tube .
14. After thoroughly inspecting all components, reassemble
in the reverse order of disassembly steps. Make sure all
components are clean, secure and undamaged .
Figure 9
Figure 8
Figure 10
Coupling
Bearing
Spacer
Bearing
Seal
Figure 7