GX2355S
Owner’s Manual
page 39
7.5
INDIVIDUAL DIRECTORY SETUP (DSC)
1. Press and hold the
CALL/SET
key until the
SETUP menu is displayed.
2. Select INDIV DIR by using the
Channel
Selector
knob.
3. Press the
CALL/SET
key to enter the individual
directory.
4. Turn the
Channel Selector
knob to display the
next address number.
(Example: The address number 01 - 04 have
been stored in the illustration on the left.)
The address number can be set from 01 to 30.
5. Press the
CALL/SET
key to store the address
number.
6. Turn the
Channel Selector
knob scroll through
the alphabet and 0 - 9.
7. Press the
CALL/SET
key to enter the desired
letter and move the cursor one space to the
right. Repeat procedure until the name is
complete. The name can consist of up to eleven
characters, if you do not use all eleven
characters press the
CALL/SET
key to move to
the next space. This method can also be used
to enter a blank space in the name. To clear the
previous letter, press the
H/L
key.
8. After the eleventh letter or space has been entered, press the
CALL/SET
key to advance to the MMSI (Maritime Mobile Service
Identity Number) number entry.
9. Turn the
Channel Selector
knob to scroll through numbers, 0-9. To
enter the desired number and move one space to the right press the
CALL/SET
key. Repeat procedure until all nine space of MMSI
number are entered.
LAMP ADJUST
A
CONTRAST
CH NAME
>INDIV DIR
N A M E
– – – – – – – –
MMSI
N A M E
– – – – – – – –
MMSI
–
N A M E
– – – – – – – –
MMSI
B
N A M E
– – – – – – – –
MMSI
B O
N A M E
– – – – – – – –
MMSI
